Gallery - Page 41
These are some examples of the knives I've made through the years.

Forged Integral Titanium Kitchen Knife
Forged 6AL-4V Titanium from a barstock. (12 1/2" OAL and 7 1/4" blade)
Blade thickness at the bolster is 7 mm (0.27") and it tapers towards the tip. Guayacan handle with carbon fiber spacers and buttcap.
Hand made leather sheath.

Any imperfection on the pictures is because of reflections!

Customized Emerson Horseman
Base Knife: Emerson Knives Horseman.

Modifications:
- San Mai Damascus 1010/304 with a D2 core re-blade.
- Deer stag handles.
- Mokume (brass/copper) dovetailed bolsters, backspacer and opening disk.

San Mai Damascus Nessmuk Knife
San Mai damascus in 1010/1070 with a 5160 core.
Overall length is 8" with a 3 1/2" cutting edge. 3 3/4" from tip of the blade to the handles. 1/8" thickness.
Full stag handle. Lanyard hole and brass tube. Mokume (brass/copper) bolsters and lanyard bead. Heavy duty hand made leather sheath.

San Mai Damascus Nessmuk Knife
San Mai damascus in 1010/1070 with a 5160 core.
Overall length is 8" with a 3 1/2" cutting edge. 3 3/4" from tip of the blade to the handles. 1/8" thickness.
Full stag handle. Lanyard hole and tube. Damascus (1010/1070) lanyard bead. Heavy duty hand made leather sheath.

Cable Damascus Neck Knife
Heat colored cable damascus (1085).
85mm (3.34") long, with a 47mm edge (1.85") It's 5mm (0.19") thick at the handle and tapers towards the tip. Stag lanyard bead.
Neck carry leather sheath.