Gallery - Page 4
These are some of the knives I've sold recently. I do take orders
for custom knives, so if you see something you like or want to work
with me on a personal design, just email
me your ideas and I'll get back to you with my thoughts on your knife and to quote you an estimate and time frame for the project. |
Damascus Neckers
Damascus made of 1030 and 5160
2.7" blade (cutting edge) 6.25" overall length. 3/16"
(4.7mm) thick in the center and getting slightly thiner towards the
ends for better balance. Lanyard hole. Sheath is handstitched cow
leather. |
Coppered Damascus Stag
5.5" blade (1/4" thick), 10.5" overall length. Handle
was made from red deer stag and the bolster is polished leather and
acetate. Pommel is coppered damascus. Sheath is handstitched cow leather. |
Integral Damascus Fighter
Damascus made of 1030 and 1085.
6.25" blade (including bolster), 11" overall length. Double
hollow grind that turns into a double convex grind at the tip for
extra strenght. Handle was made from Padouk (African Vermillion) and
it has finger grooves and droplets of transparent poliurethane for
a better and secure grip. Sheath is handstitched cow leather. |
Small Utility
D2, differentially hardened, satin finish. I made this using stock
removal, it's not forged.
3.15" blade, 7" overall length. Handle was made from layers
of Caoba (Mahogany) and Guatambu (Pau Marfim), with bolster and butt
made of Bronze. Sheath is handstitched cow leather. |
Integral Criollo
Hand forged, diferentially hardened 9260.
4.5" blade, 9" overall length. Handle was made from layers
of Caoba (Mahogany) and Guatambu (Pau Marfim), and this particular
handle was painted black with an aerograph on the top and the bottom,
and then laqued with transparent poliurethane. Sheath is handstitched
cow leather. |
|
